Wire rope pulling winch has high versatility, compact structure, small volume, light weight, heavy weight, easy use and transfer. It is widely used in construction, water conservancy projects, forestry, mining, wharf and other material lifting or towing, but also can be used as a modern electronic automatic operation line supporting equipment.
Loading capacity: 0.5~100t;
Wire rope capacity: 20~5000 m;
Working speed: 5~20 m/min;
Power supply: 220-690V,50/60HZ,3Phase
Our company, a professional winch supplier in China, provides types of wire rope pulling winch for sale. Reliable quality, reasonable design, affordable price, customized service, our company have absorbed more repeat customers. If you are interested in our construction winches, just send inquiry to email@example.com , we will reply to u asap.
JM Type Winch
Loading capacity: 0.5~200 t;
Wire rope capacity: 20~3600 m;
Working speed: 5~20 m/min;(single/dual speed)
Power supply: 220-690V,50/60HZ,3Phase;
Types of wire rope pulling winch
JM electric control slow speed winch, JK electric control high speed winch, JKL fast speed piling winch, JT speed regulating winch, JKD small winch.
JM series are gear reducer driving winch. It is mainly used for lifting, pulling and unloading, pushing and dragging heavy objects, such as a variety of large and medium-sized concrete, steel structure and mechanical equipment and the removal of the device. It is suitable for civil construction and installation projects in construction and installation companies, mining areas and factories.
Slow speed winch: the winch with the rated speed of steel wire rope on the drum about 7~12m/min.
Fast speed winch: the winch with the rated speed of steel wire rope on the drum about 30m/min.
Electric winch: a winch that is powered by an electric motor and is installed through drive to make the drum turn.
Speed regulation winch: a winch that can be adjusted by speed control.
Large tonnage no-standard winch: Its structural characteristics include orderly arrangement of steel wire rope, a reliable lifting device. It is suitable for the port and dock, bridge, road and bridge engineering and large factories and mines devices. The winch adopts the external force (such as motor) to drive operation, and then control its running through the electromagnetic brake and lock brake under the no-powered condition, after a motor drive to slow down at the same time, it drives a running wheel, wheel can roll of wire rope or other things.
Steps of winch maintenance
During the winch operation process, observe and check the brake, clutch, stop the role and wear, timely troubleshooting.
In normal operation, every year or so to carry out a major overhaul or overhaul after the end of a construction period, replace worn bearings and other vulnerable parts, usually found problems should be maintained at any time.
During the process of winch transportation and maintenance, put the winch in a dry place, take good moisture-proof, anti-corrosive measures for winch parts.
Usual failures and handling methods
The brake wear makes clearance too large, it affects the brake reliability. Adjust clearance or replacement components in time. If the bearing becomes overheated due to wear or poor lubrication, improve lubrication or replace the bearing as the case may be.
The overload motor or motor bearing heat, it needs to stop cooling, refuel timely, reduce the load. Open the power switch in advance before check electric equipment. Keep electric equipment clean, take regular cleaning for dust, dirt, oil. There is no oil on contact terminal. Burned or oxidized contacts shall be ground down with fine sandpaper, insulation rings are not allowed to use gas wishing. In order to prevent the armature iron core contact surface rust, lubricate the winch with machine oil, then wipe clean. The sections of the resistor cast iron sheet should be checked regularly for fracture.
When the motor is running under rated load, pay attention to whether there is any abnormal sound in the motor rotation, whether there is spark between the brush and the slip, and whether the motor is hot, not exceeding the allowable value.