15 ton winch for sale has compact structure, easy operation, high efficiency, affordable price. It has wide application in many places, such as construction site, workshop, industrial building places. The winch can increase working efficiency and improve working conditions.
Except for construction purpose, 15 ton winch can be used for dragging heavy boat. With strong power, the worker can save much energy and ensure safety. If you are interested, just contact with us! firstname.lastname@example.org
AQ-JM Type Winch
Loading capacity: 0.5~200 t;
Wire rope capacity: 20~3600 m;
Working speed: 5~20 m/min;(single/dual speed)
Power supply: 220-690V,50/60HZ,3Phase;
Our top quality 15 ton winch for sale
Our company is a modern joint-stock enterprise specializing in the production of construction winch, with a production history of more than 30 years. Advanced manufacturing equipment, exquisite technology, perfect means of testing, complete varieties and specifications, excellent quality, standing in the first peer. The construction winch produced by our company has obtained the construction winch production license issued by the general administration of quality supervision, inspection and quarantine.
Slow speed winch VS fast speed winch
Differences between slow speed winch and quick speed winch:
1. Applications are different: electrical control slow speed winch is mainly used for cargo lifting and large lifting engineering, suitable for construction and installation companies, mining and factory civil and construction engineering with requirements of good speed regulation performance, decreasing the rate of micro project.
Electronic controlled quick winch is mainly used in construction, railway, factories and mines, bridges, etc. It is suitable for vertical lifting, horizontal and slope hauling heavy loads and other conditions.
2.Different models: slow speed winch model: AQ-JM type, model of fast speed winch: AQ-JK type
3.Different speeds: the rated speed of the slow winch is 16m/min, or lower.Rated speed of quick winch: 22m/min, or above.
4.The price is different: because the slow hoist speed performance is good, so, the price of the slow speed winch is higher than that of the fast speed winch.
How to prolong the service life of winch gear?
Four methods for prolonging the service life of hoist gears:
In the energy saving hoist transmission device, the gear is the main component, we know that the gear is a relatively easy to wear parts, so how to maintain, delay its wear in the whole hoist equipment is a key point of maintenance. Next, I introduce several methods to prolong the service life of gears.
1.Improve the working environment, so as to avoid gear in the air dust caused by increased friction, increase wear.
2.To avoid energy saving hoist load work, once the equipment load work, gear and other parts will be multiplied wear.
3.Improve gear heat treatment process, the selection of advanced technology and materials can improve the life of energy-saving hoist gear.
4.Ensure the effective lubrication of the gear, lubrication can reduce the friction between the gear, so it is also a way to extend the life of the gear.
Correct use of the winch
The wire rope shall not be knotted or twisted, and shall be replaced when the broken wire exceeds 10% within a pitch.
During the operation, no one shall cross the wire rope. After the object (object) is lifted, the operator shall not leave the winch. Objects or hanging cages should be lowered to the ground when resting.
In the operation, the driver and signalman shall maintain good visibility with the lifting objects, and the driver and signalman shall cooperate closely and obey the unified signal command.
In case of power failure during operation, the power should be cut off to lower the hoist to the ground.
Listen to the signal of the command staff in work, and the signal is unknown or may cause an accident. The operation should be suspended until the situation is clear.
Sudden power failure in the operation, should immediately pull the knife, transport down.
Upon completion of the operation, the material tray shall be floor to floor and the electric box shall be closed and locked.
Wire rope in the process of use and mechanical wear.
Overload is strictly prohibited. That is, it exceeds the maximum carrying tonnage.
In the use of the process should pay attention to do not appear knotting, flattening, arc damage, erosion of chemical media.
High temperature objects shall not be directly hoisted. Protective plates shall be added for the objects with edges and corners.
The steel wire rope should be checked frequently during use and scrapped immediately if it reaches the scrapping standard.
The steel wire rope on the drum should be arranged neatly, if found overlapping and oblique winding, should stop rearranging. Do not pull or step on the wire rope with hands or feet while rotating. The wire rope must not be let out completely, at least keep three turns.